Shopping cart: 0 item(s) - £0.00
- Bulb Fitting type
B22 Bayonet Bulb
E14 Small Edison Screw
E27 Large Edison Screw
GU10 Spotlight
MR16 Spotlight
G9
GR10q 2D
Tube Lights
Please use this fittings guide to make sure your purchase the correct bulbs.
B22, E14, E27 are normally found in the home. E14 small edison screws are 14mm diameter (SES), E27 edison screws are 27mm diameter (ES), B22 bayonet bulbs are 22mm diameter and with two pins
GU10 and MR16 spotlights. The GU10 has a bevel around the base. The MR16 has 2 thin pins at the base.
G9 miniature capsule lamps are for 240v mains use and have 2 rounded pins
GR10Q 2D use 4 pins and are normally used for emergency lighting.
- Security Lighting
- Burglar Alarms
Installed - CCTV Systems
Installed
Categories
- Alarm Systems
- Bargain Stock Clearance
- Bathroom Lights & Fittings
- CCTV
- Colour Changing / Party Celebration Lights
- Commercial LED Lighting +-
- Emergency LED Lighting & Signs
- LED Light Bulbs +-
- LED Spotlights +-
- LED Strip Lights
- LED Torches & Gadgets
- Lighting Accessories
- Outdoor Lighting +-
- Security Lighting LED
- Wall & Ceiling Lights
- Water Proof & Fire Rated
- Wholesale +-
Standalone Photocell Day/Night Switch Sensor - LED Compatable
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
£8.32
Standalone Photocell Day/Night Switch Sensor - LED Compatable
Our PowerMaster Photocell sensors can be used in a variety of applications but are commonly used for outdoor lighting which needs to automatically turn on at dusk and turn off at dawn, and is tested to work well with LED lighting.
The sensor automatically turn lights on or off in response to changes in ambient light levels primarily the transition from day to night and vice versa.
They also go on monitoring at times other than dusk and dawn enables the sensor to determine what it should be looking for minimizing false triggering and improving overall controller operation.
- Dusk to Dawn Light Switch
- Polycarb
- Clear Lens
- Ambient Light 5~45Lux
- Pre-set 15-30 Sec Delay to Avoid False Trigger
- Max Loading Capacity 1000w
- Florescent 300w or LED 300w
- 240V
- IP44
- 88 x 88 x 130mm
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
-200x200.jpg)
Powered By OpenCart
Prime LED - Night Vision CCTV © 2019